EcoTechNews | Sustainable Innovation & Green Technology News

A news site that features articles about the environment and ecological technologies

Woman bending over a large pile of used plastic bottles and placing them into a sack
Waste & Recycling

Turning Plastic Waste Into Fuel: Can HDPE Become DME?

Seven students in Dubai say plastic packaging could become cooking fuel. Gulf News reported on October 28, 2026 on their project, Methagreen, which targets HDPE, or high-density polyethylene, a common plastic in containers, bottles and packaging. The team plans to heat the plastic, turn the resulting gas into a fuel called dimethyl ether (DME), and burn that for cooking or electricity.

For a school team, that is a long chain of chemistry. Researchers have studied each link, and their papers show where the going gets hard.

How the Methagreen plan turns plastic into fuel

According to Gulf News, the team members are 16 to 18 and have lived in the United Arab Emirates (UAE) for over 10 years. The idea started as a school competition entry. Since then the team has presented it at the GITEX North Star 2025 technology event and the UAE’s Zayed Sustainability Prize. The report lays out the plan in four steps. Several of them depend on catalysts, materials that speed up a chemical reaction without being used up. The table sets each step beside what published research says.

StepThe team’s plan (Gulf News)What research reportsOpen question
1. Plastic to gasHeat and process HDPE to produce methaneAt 500 °C (932 °F), HDPE gave about 25% gas and 72% oil; methane ranked fourth among the gasesThe report does not say how the team would raise the methane share
2. Methane to syngasReact methane with carbon dioxide to make a hydrogen and carbon monoxide mixDry reforming is well studied; nickel catalysts lose effectiveness as carbon builds up and metal particles clumpIt is not clear how the team would keep the catalyst working
3. Syngas to DMEProcess the syngas with catalysts to make DMEThe usual route goes through methanol; water formed in the reaction can harm catalystsNothing says whether syngas made this way suits the catalysts
4. DME to energyBurn it in an adapted cooking system or a compatible generatorDME is already blended into cooking gas in several countriesNo stove or generator test results are given

Team plan as reported by Gulf News on October 28, 2026. Research columns draw on the studies named in the text.

Each step has research behind it, but the team says the whole system still needs practical testing. Gulf News reports that energy efficiency, emissions and whether the system works as intended are all untested.

Want to stay updated on renewable technology news and trends? Subscribe to get the latest innovations and global developments in sustainable energy and technology.

The team also wants to turn other by-products into solid carbon and metal oxides, though Gulf News says that part is still being developed. Early calculations, the report adds, suggest a plant handling about one tonne (2,200 lb) of HDPE a day could generate substantial electricity. No figure is given.

What happens when HDPE is heated

Heat a plastic without air and it breaks apart instead of burning, a process chemists call pyrolysis. A 2024 study in Green Chemistry by Wu and colleagues did this to HDPE at 500 °C (932 °F). For new, unused HDPE made of long molecular chains, 24.9% of the mass came out as gas, 72.5% as liquid and 0.9% as solid.

The gas was mostly ethylene, propylene, ethane and methane, listed in that order. At those settings, then, methane is not the lead gas, and most of the plastic turns to oil. The study tested one temperature and one length of time in the reactor, so it cannot say what other settings would give.

Gulf News says the first Methagreen step heats and processes HDPE to make methane, but it names no temperature or equipment. That leaves nothing to compare with the Green Chemistry result.

From methane to syngas to DME

The second step, dry reforming of methane, reacts methane with carbon dioxide to produce syngas, a mix of hydrogen and carbon monoxide. A 2022 review in Nanomaterials by Hussien and Polychronopoulou of Khalifa University in the UAE points out that the reaction uses two greenhouse gases. It also reports that the main nickel-based catalysts suffer from coking and sintering.

Coking means carbon builds up on the catalyst, and in sintering the metal particles clump together. Either one makes the catalyst work less well over time. The review’s summary gives no operating conditions, so none are given here.

Kraleva and colleagues reviewed the last step in Catalysis Science & Technology in 2025. Their review covers routes to DME from carbon dioxide and syngas. The usual route goes in two stages: syngas to methanol, then methanol to DME. According to the review, commercial plants make methanol from syngas at 250 to 280 °C (482 to 536 °F).

A one-step route puts both jobs in one reactor, using catalysts that combine two functions. Either way, water forms along the way and can damage the catalysts. Most studies in the review used syngas in near-ideal proportions. None of the sources cited says whether syngas made from methane that came from plastic would match them.

DME as a cooking fuel: what is already in use

At about 75 psi (5 bar), DME turns from gas to liquid. A 2015 article in LP Gas magazine says it handles much like propane. The same article says most DME is made from methanol, a simple liquid alcohol.

Indonesia’s Lemigas institute published a review in 2017. It says China sends more than 90% of its DME into LPG blends. LPG, short for liquefied petroleum gas, is the bottled gas that households use for cooking and heating. The effect of DME on seals and other materials, the review adds, still needs research. In March 2026, India’s National Chemical Laboratory (CSIR-NCL) reported a pilot plant that turns methanol into about 250 kg (550 lb) of DME a day.

Project or marketStarting materialScaleStage
Methagreen (Dubai)HDPE plastic, via methane and syngasPrototype planned for about 100 kg (220 lb) of HDPE a dayIdea and calculations; prototype after exams
CSIR-NCL (India)MethanolAbout 250 kg (550 lb) of DME a dayPilot plant, pre-commercial
China, per the 2017 Lemigas reviewMostly coal-based, per the 2015 LP Gas articleMore than 90% of China’s DME goes into LPG blendsIn use for household cooking and heating

Scales are not directly comparable: the Dubai figure is plastic going in, the Indian figure is DME coming out.

In practice, DME mostly goes into blends. CSIR-NCL reports that up to 8% DME in LPG needs no changes to cylinders, regulators, hoses or cooking appliances. India’s standard IS 18698:2024 permits up to 20%, and LP Gas magazine quotes industry officials who say 20% needs no equipment changes. Gulf News says the Methagreen team would use an adapted cooking system. Still, none of the sources cited here reports tests of a stove running on DME alone.

Plastic to fuel compared with recycling and burning

In 2019 the world produced 353 million tonnes (389 million short tons) of plastic waste, estimates the Organisation for Economic Co-operation and Development (OECD). About 9% was recycled, 19% incinerated, almost 50% sent to sanitary landfills and 22% mismanaged, meaning dumped, burned openly or leaked into the environment. Processes that turn waste plastic into something useful are aimed at that gap.

Whether fuel beats recycling depends on energy and emissions. A 2025 life-cycle study, which adds up a process’s emissions from start to finish, looked at pyrolysis of mixed plastic waste. Its authors, Trecáková and colleagues at the University of Chemistry and Technology Prague, found that climate impact depended on how the plant was set up. It ranged from 133 kg (293 lb) saved to 966 kg (2,130 lb) emitted per tonne (1.1 short tons) of plastic. Electricity use was the main driver, and pyrolysis came out lower than waste-to-energy incineration, which burns waste to make power.

The study has limits: its data came from a supplier’s pilot plant, it used the European power mix, and its comparison with recycling was indirect. It also did not examine a DME chain. The team’s own claim is that reusing carbon dioxide keeps the footprint low, but Gulf News reports no calculation behind it.

Several related routes are also at an early stage. The ecotechnews.world piece on plastic and coal waste co-gasification covers a laboratory study that turns waste into hydrogen-rich syngas. A second piece describes a sewage-to-methane process shown mainly at lab scale. The AquaFlame hydrogen cooker, meanwhile, is a clean-cooking idea still in a pilot phase.

What is known and what is not

Heating HDPE gives oil and gas, and DME is a real fuel already blended into cooking gas. Each link in the Methagreen chain has research behind it. Yet the cited sources give no settings for step one and no catalysts for step two. They also give no yield for the whole chain, and no comparison of the energy it uses with the energy it delivers. The team plans a prototype after its exams, along with a research paper and a patent as a goal for mid-2027. Data from that prototype would be the next thing to watch.

Frequently Asked Questions

Can plastic waste be turned into fuel?

Yes, in the lab. Heating HDPE without air at 500 °C (932 °F) gave about 72% liquid and 25% gas in a 2024 study. Turning that into DME through the Methagreen chain has not been shown as one system.

What is DME?

Dimethyl ether, shortened to DME, turns liquid under moderate pressure and handles much like propane. Mostly it goes into LPG blends for cooking and heating.

What is syngas?

Short for synthesis gas, syngas is a mix of hydrogen and carbon monoxide. Fuels such as methanol and DME can be made from it.

What is a catalyst?

Catalysts are materials that speed up a chemical reaction without being used up. Several Methagreen steps depend on them, and the reviews describe how catalysts can lose effectiveness through carbon build-up, clumping or water.

Can DME replace LPG in a home stove?

Blends can. CSIR-NCL reports up to 8% DME needs no changes to appliances, and India’s standard allows up to 20%. The sources cited here report no tests of stoves running on DME alone.

Is turning plastic into fuel better than recycling?

Among the studies cited here, none compares the two for this chain. A 2025 life-cycle study found pyrolysis had a lower climate impact than waste-to-energy incineration, with electricity use as the main driver. Only about 9% of plastic waste was recycled worldwide in 2019, according to the OECD.

How far along is the Methagreen project?

It is at the idea and calculation stage. Gulf News reports that the team plans a prototype handling about 100 kg (220 lb) of HDPE a day after its Grade 12 exams. The system still needs practical testing.

Acknowledgment of AI

Content developed using AI technology, reviewed to ensure clarity, coherence, and accuracy before publication

LEAVE A RESPONSE

Your email address will not be published. Required fields are marked *

With a background in telecommunications engineering, my career has been centered around reporting, product information management, and web development. For over a decade, I have also worked as a small business owner specializing in web services. I believe that as we continue to advance technologically, it is essential to remain conscious of the impact these innovations have on the planet. Whether it's through cutting-edge solutions in renewable energy, smart systems, or sustainable infrastructure, my focus is always on leveraging technology to foster a more environmentally responsible world. Outside of professional pursuits, I am continuously curious about the evolving relationship between humans, technology, and nature, and how we can integrate these elements for a better, more sustainable future.
Privacy Overview
EcoTechNews | Sustainable Innovation & Green Technology News

This website uses cookies

We use cookies to ensure the best possible user experience and to analyze website traffic. Cookies are stored in your browser and help us recognize you when you return to our site, as well as understand which sections of the website are most relevant and useful to you. You can manage your cookie preferences at any time.

Learn more about our cookie policy here

Strictly Necessary Cookies

Strictly necessary cookies must remain enabled at all times to store your preferences for cookie settings.

3rd Party Cookies

This website uses Google Analytics to collect anonymous information, such as the number of visitors and the most popular pages.